Raspberry Pi 2 Model B Starter Pack - Includes a Raspberry Pi 2
Raspberry Pi 2 Model B Starter Pack - Includes a Raspberry Pi 2Raspberry Pi 2 Model B Starter Pack - Includes a Raspberry Pi 2

Набор Raspberry Pi 2 Starter Pack с Raspberry Pi B2

Ожидается

Нет в наличии

Код товара: 2380
Категории: , , ,

Описание товара

Why not trick out your fresh new board with some accessories? The Pi 2 is a big deal — a big, big deal.  It has an upgraded ARMv7 multicore procssor and a full Gigabyte of RAM — meaning you’re going to see ~2x the performance on processor-upgrade only and 4x on average for mutliple-core procssors.  That’s up to like 7.5x increase in speed without taking into account the 1 Gig of RAM.

Should you be excited? Yes.  Should you be so excited that you forget everything you need to get started? No.

We’ve hand chosen these accessories as the perfect accompaniment to your new Raspberry Pi 2 — Model B.  It’s everything you need to get going with a high quality power supply, Raspbian SD card (newly updated to work on the Pi 2), case, WiFi adapter, console cable, and lots of prototyping essentials.  It’s a great jumping off point for the rest of our extensive accessory and pack collection.

This pack comes with a single Raspberry Pi 2 Computer!

This pack contains:

  • Raspberry Pi 2 Model B последняя модель, с четырехядерным процессором ARMv7  и увеличенной памятью до 1G RAM, которая поддерживает Windows 10
  • Корпус Smoke для Raspberry Pi B+ и B2 — We think it’s the Single Greatest Raspberry Pi 2 Model B Case Ever — though our Pi Box Plus is also nothing to scoff at.
  • Assembled Pi Cobbler Plus — This is the soldered together version of our popularPi Cobbler Plus Kit.  Comes with a breakout board that’s perfect for cobbling prototypes as well as a 40-pin GPIO cable for your Pi’s pins.
  • ​Макетная плата стандартная — In the past, we’ve used the half-size breadboard for a lot of Pi projects — but no longer! WIth 40 pins to break out, you’re going to need some space — and that’s why we’re including a full size breadboard in this pack.
  • Джампер папа-папа 20шт 150мм — These jumper wires are great for making wire harness or jumpering between headers on PCBs.  We include the longer ones so they work well with the full-size breadboard.
  • USB to TTL Serial Cable — Самый простой способ подключить Raspberry Pi к компьютеру/ноутбуку и получить доступ к консоли, не используя монитор и манипуляторы.
  • USB WiFi Module — Give your Rasp Pi the Internet with this USB port WiFi module, this module is compact but has great range and is plenty fast.
  • 4GB microSD+адаптер с предустановленной Raspbian Wheezy — 4GB microSDHC карта с предустановленной последней версией дистрибутива Linux для Raspberry Pi. Совместимо со всеми версиями плат Raspberry Pi, включая Pi 2 model B.
  • Блок питания 5V 2A с microUSB-коннектором и переходником, с силой тока 2A, которая является максимально допустимой для плат Raspberry Pi
  • Бейджик Raspberry Pi — отличительный знак, который, познавший сущность платформы Raspberry Pi, может гордо носить на груди.
  • Бонус пакет! Everyone loves bonuses so we include some parts that will get you through some of the tutorials on the Adafruit Learning System.  These include:
    • 1x Photo Cell
    • 5x 10K 5% 1/4W Resistor
    • 5x 560 ohm 5% 1/4W Resistor
    • 1x Diffused 10mm Blue LED
    • 1x Electrolytic Capacitor — 1.0uF
    • 1x Diffused 10mm Red LED
    • 1x Diffused 10mm Green LED
    • 3x 12mm Tactile Switches

Here’s a good introduction to the Pi 2 and a few more learn guides that are worth checking out to start.  While they’re for the Model B, they will all apply to the Raspberry Pi Model B+ and the Raspberry Pi 2.

  • Introduction to outputs — light up an LED when you get an e-mail
  • Introduction to inputs — play MP3 audio files when three different buttons are pressed
  • Introduction to sensors — reading a photo cell sensor with RC timing to detect light changes