This handy 2×20 IDC Box Header is the matching connector for our 40-pin GPIO Cable. By soldering this onto perf board you can run a GPIO cable from your Pi A+ or B+ to the socket.
This is the same socket that comes with our Pi Cobbler Plus or Pi T-Cobbler Plus but without the PCBs or anything
This socket only works for the Raspberry Pi Model A+ and B+ GPIO cables. It does not work with the Raspberry Pi Model B GPIO cables. It is just the socket.
- 9mm x 58mm x 12mm / 0.35″ x 2.3″ x 0.5″
- Weight: 4.6g