2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets

2×20 Socket Riser Header for Raspberry Pi HATs and Bonnets

99 грн.

Код товара: 4079
Категории: ,

Описание товара

Give yourself a lift with this 2×20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug a HAT or Bonnet or Phat on top.

Especially useful for Bonnets that have slim headers on the bottom, but you want them to clear some of the components on the Pi, or fit into a case nicer.

The header body is a standard 8.5mm. The pins are 6mm tall, so they’re securely plug into socket headers like male-pin type ones.

You’ll get one header per order!

  • Pin Length: 6mm
  • Pin Spacing: 2.5mm / 0.1″
  • Pin Thickness: 0.6mm / 0.02″

Product Dimensions: 51.5mm x 14.0mm x 5.0mm / 2.0″ x 0.6″ x 0.2″

Product Weight: 4.1g / 0.1oz