Просмотр корзины → Товар успешно добавлен в корзину.
3.5"_TFT_320x480+Touchscreen_Breakout_Board_w/MicroSD_Socket
2050-003.5"_TFT_320x480+Touchscreen_Breakout_Board_w/MicroSD_Socket2050-032050-042050-062050-082050-13

3.5″ TFT 320×480 + Touchscreen Breakout Board w/MicroSD Socket

1,964 грн.

Код товара: 2050
Категории: ,
Тег:

Описание товара

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5″ diagonal) bright (6 white-LED backlight) and colorful! 480×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display, and double our 2.8″ TFT. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit or SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog) or you can purchase and use our resistive touchscreen controller (not included) to use I2C or SPI.

Of course, we wouldn’t just leave you with a datasheet and a «good luck!». Check out our detailed tutorial for wiring, test and example code!For 8-bit interface fans we’ve written a full open source graphics library that can draw pixels, lines, rectangles, circles, text, and more. For SPI users, we have a library as well, its separate from the 8-bit library since both versions are heavily optimized. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it.

Specifications:

  • 3.5″ diagonal LCD TFT display
  • 320×480 resolution, 18-bit (262,000) color capable — our code uses only 16-bits since its faster.
  • HXD8357D (datasheet) controller with built in video RAM buffer
  • 8 bit digital interface, plus 4 or 5 control lines (12 pins minimum) or SPI mode with 4 or 5 SPI data/control lines (4 pins minimum) — not including the touch screen.
  • 5V compatible! Use with 3.3V or 5V logic such as an Arduino
  • Onboard 3.3V @ 150mA LDO regulator
  • 6 white LED backlight with DC/DC constant-current boost. You can PWM dim the backlight
  • 1×20 headers for easy breadboarding
  • 4-wire resistive touchscreen

Dimensions:

  • Screen: 56mm x 85mm x 4mm / 2.2″ x 3.4″ x 0.2″
  • PCB: 56mm x 97mm x 2mm / 2.2″ x 3.8″ x 0.1″
  • Weight: 52g

Работа магазина приостановлена. Заказы не принимаются.