Adafruit FONA 800 Breakout Board Starter Pack - SMA Version
Adafruit FONA 800 Breakout Board Starter Pack - SMA Version

Adafruit FONA 800 Breakout Board Starter Pack — SMA Version

1,952 грн.

Код товара: 2522
Категории: ,

Описание товара

  • Build your own cellular project and get off the grid with FONA. This pack comes with an SMA-antenna type FONA and paired with hand-picked accessories. It’s the Adafruit FONA — SMA Starter Pack.

    The FONA miniGSM is an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package.

    This module measures only 1.75″x1.25″ but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything. This starter pack has a SMA connector. For the uFL version, click here! And for the Adafruit FONA 800 uFL Shield version click here!

    • Quad-band 850/900/1800/1900MHz — connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)
    • Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone
    • Send and receive SMS messages
    • Send and receive GPRS data (TCP/IP, HTTP, etc.)
    • Scan and receive FM radio broadcasts (yeah, we don’t exactly know why this was included but it works really well)
    • PWM/Buzzer vibrational motor control
    • AT command interface with «auto baud» detection

    Sounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shine:

    • Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done
    • Standard 4-pole TRRS headphone jack. Use any ‘Android’ or ‘iPhone’-compatible headset with mic
    • Breakouts for external 8Ω speaker and electret mic if you don’t want to use a headphone
    • Level shifting circuitry so you can run it with 2.8V to 5V logic.
    • Vibrational motor (buzzer) driver so you can have noiseless notifications
    • SMA connection for external antenna
    • Indicator LEDs for power and network connectivity
    • Standard SIM slides into the back

    On its own, this module can’t do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins.

    Microcontroller not included! We recommend an Arduino UNO to go along SIM card not included! If you are in the USA, we recommend TING

    This Pack Contains:

    • 1x Adafruit FONA — Mini Cellular GSM Breakout — SMA Version — v1
    • 1x Right-angle Mini GSM/Cellular Quad-Band Antenna — 2dBi SMA Plug
    • 1x Lithium Ion Polymer Battery — 3.7v 1200mAh
    • 1x Mini Metal Speaker w/ Wires — 8 ohm 0.5W
    • 1x Wired Miniature Electret Microphone
    • 1x Cell-phone TRRS Headset — Earbud Headphones w/ Microphone
    • 1x Vibrating Mini Motor Disc
  • Технические данные

    This Pack Contains:

    • 1x Right-angle Mini GSM/Cellular Quad-Band Antenna — 2dBi SMA Plug
    • 1x Mini Metal Speaker w/ Wires — 8 ohm 0.5W
    • 1x Vibrating Mini Motor Disc
    • 1x Adafruit FONA — Mini Cellular GSM Breakout — SMA Version — v1
    • 1x Lithium Ion Polymer Battery — 3.7v 1200mAh
    • 1x Wired Miniature Electret Microphone
    • 1x Cell-phone TRRS Headset — Earbud Headphones w/ Microphone

    Datasheets:

    • FCC TCB BT
    • R&TTE Statement of Opinion
    • FCC Part 15B Test Report
    • FCC Part 15C Test Report
    • FCC RF Test Report
    • FCC TCB

Adafruit FONA 800 Breakout Board Starter Pack - SMA Version