Просмотр корзины → Товар успешно добавлен в корзину.
Adafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixels
Adafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixelsAdafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixelsAdafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixelsAdafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixelsAdafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixels

Adafruit Soft Flexible Wire NeoPixel Strand — 50 NeoPixels

997 грн.

Код товара: 4560
Категории: ,

Описание товара

We have all sorts of LED strips for a wide range of needs. Chonky strips? We got those! Strips with alligator clips that are easy-peasy to MakeCode? Oh definitely. Weatherproof? We have a gamut of options.

And here’s a new variation, a veritable bundle of Soft Flexible Wire Mini NeoPixels! Attaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little dots of color? Use this stranded NeoPixel that uses soft cords of plated wire! They’re very small, so they’re easy to embed into any structure, costume, or wearable. The wires can be sewn over, or embedded in a casting.

The strip is made of flexible wires with a coated NeoPixel every ~100mm (~4 inches) with a total of 50 LEDs. It does not come with weatherproof sheathing so you cannot wash these or dunk them underwater. You can cut the strand pretty easily with wire cutters. Note that while the wires are coated so they don’t short against each other, that coating will wear off over time especially when flexed, so avoid abrasion or repeated flexing of the connector cables.

Connecting to these is a little tricky because there’s no power/data markings (there’s no PCB!) So instead, look at the twisted stranded wires that connect the NeoPixels. The data wire is the middle wire. The ground wire is marked with a light red stripe. The remaining wire is +5V power. Note that if you’re connecting to the JST cable, the red wire on that cable may not be soldered the red wire on the NeoPixel strand!

The strands come with connectors pre-attached but you can carefully solder to the flexible wires as well. Of course, you can also connect strands together to make them longer, just watch how much current you need! We have a 5V/4A supply that should be able to drive 1 meter and a 5V/10A supply that can drive up to 10 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.

We have a tutorial showing NeoPixel wiring, power usage calculations, example code for usage, etc. Please check it out!

 

Работа магазина приостановлена. Заказы не принимаются.