st7565neg_LRG
st7565negback_LRGst7565negblue_LRGst7565negfront_LRGst7565neggreen_LRGst7565negpurple_LRG

Graphic ST7565 Negative LCD (128×64) with RGB backlight + extras — ST7565

803 грн.

Код товара: 438
Категории: ,

Описание товара

This graphical display looks fantastic, at a great price! This display will add the ultimate cool to your project, with a black negative display that has a full RGB LED backlight. You can control with PWM to make any color you can imagine, and it will look stunning with the black inverted (negative) background.Four mounting holes and a blank 11 pin 2mm-pitch labeled breakout on the side — we just soldered some wire to each hole as shown in the photos, its very easy. (The LCDs have no wires soldered in when we ship them)

Bonus! We’re including a free 4050 level shifter chip so that you can safely use it with your favorite 5V microcontroller

Advantages!

  • Lower cost than KS0108 LCDs
  • Serial interface uses only 4 or 5 digital pins
  • Low power, full-color RGB LED backlight
  • Visible in daylight without backlight
  • Works perfectly with 3V logic

Challenges!…

  • 3.3v power and logic means a level converter is needed for 5V Arduinos (we include this part when purchasing from us)
  • Microcontroller must buffer display — uses 1Kb of RAM. This means you must upgrade to a ATmega328 if you are using an Arduino with a ‘8 or ‘168

For a more detailed tutorial, including how to wire up the display with a 4050, see our writeup at http://www.ladyada.net/learn/lcd/st7565.html

We have C code and an Arduino library ready to go (we suggest reading the above tutorial too!)