st7565pos_LRG
st7565posback_LRGst7565posblue_LRGst7565posfront_LRGst7565posgreen_LRGst7565posoff_LRGst7565pospurple_LRGst7565posyellow_LRG

Graphic ST7565 Positive LCD (128×64) with RGB backlight + extras — ST7565

774 грн.

Код товара: 250
Категории: ,

Описание товара

This graphical display looks great, costs less! The dark gray pixels are visible in daylight, and there’s also a full RGB LED backlight, which you can control with PWM to make any color you can imagine.Four mounting holes and a blank 11 pin 2mm-pitch labeled breakout on the side — we just soldered some wire to each hole as shown in the photos, its very easy. (The LCDs have no wires soldered in when we ship them)Bonus! We’re including a free 4050 level shifter chip so that you can safely use it with your favorite 5V microcontrollerAdvantages!

  • Lower cost than KS0108 LCDs
  • Serial interface uses only 4 or 5 digital pins
  • Low power, full-color RGB LED backlight
  • Visible in daylight without backlight
  • Works perfectly with 3V logic

Challenges!…

  • 3.3v power and logic means a level converter is needed for 5V Arduinos (we include this part when purchasing from us)
  • Microcontroller must buffer display — uses 1Kb of RAM. This means you must upgrade to a ATmega328 if you are using an Arduino with a ‘8 or ‘168

For a more detailed tutorial, including how to wire up the display with a 4050, see our writeup at http://www.ladyada.net/learn/lcd/st7565.html

We have C code and an Arduino library ready to go (we suggest reading the above tutorial too!)

Datasheet for RGB backlight version including dimensional drawing

Datasheet for older ‘white’ LED backlight version