M5Stack’s Timer Camera X is an all-in-one camera module based on ESP32, integrated with ESP32 chip and has 8M PSRAM. Why so much PSRAM? Well, the camera can shoot up to 2048×1536 resolution photos(!). The module also comes with a built-in 140mAh battery and LED status indicator. There is a reset button under the LED.
You can use the built-in RTC (BM8563) to keep track of time to create custom, specific sleep and wake-up schedules. In deep sleep, the standby current of the entire Camera X can be as low as 10 μA. This camera supports sending images through WiFi and via the USB serial debug port. The bottom HY2.0-4P I2C port output can be connected to other I2C peripherals such as Grove or Stemma QT devices when this cable is in use.
A friendly heads-up: The low-power power management used by the Timer Camera series is different from the CORE and StickC devices. When in use, the PWR button is used as a power-on button (long press 2 seconds). If you need to shut down the device, use the software API or press the Reset button on the PCB.
- Design based on ESP32
- WiFi image transmission
- Timed sleep wake up
- Status indicator
- Ultra low power design
- Built-in 140mAh battery
- Programming platform: ESP-IDF/Arduino/UIFlow
- 1 x Timer Camera X
1 x LEGO Adapter
1 x Wall-1515
1 x USB cable (20cm)
For customer support, please email firstname.lastname@example.org.
- PSRAM: 8MB
- Flash: 4MB
- Sensor: OV3660
- Maximum resolution: 300w pixels
- Output: 8-/10-Bit RAW, RGB and YCbCr output, compression
- Maximum image transmission rate (OV3660): 2048×1536: 15fps / 1080p: 20fps / 720p: 45fps / XGA(1024×768) : 45fps / VGA(640×480) : 60fps / QVGA(320×240) : 120fps
- DFOV: 66.5°
- Battery: 140mAh
- Net weight: 15g
- Gross weight: 39g
- Product size: 48mm x 24mm x 15mm