Nokia 5110/3310 monochrome LCD + extras

452 грн.

Товар под заказ

Нет в наличии

Код товара: 338
Категории: ,

Описание товара

These displays were used in old Nokia 5110/3310 cell phones (before the smart-phone fad turned every cell phone into a TV). It’s a 84×48 pixel monochrome LCD display. These displays are small, only about 1.5″ diagonal, but very readable and come with a white backlight. This display is made of 84×48 individual pixels, so you can use it for graphics, text or bitmaps. These displays are inexpensive, easy to use, require only a few digital I/O pins and are fairly low power as wellTo drive the display, you will need 3 to 5 digital output pins (depending on whether you want to manually control the chip select and reset lines). Another pin can be used to control (via on/off or PWM) the backlight — the backlight LEDs are wired to a transistor.The display driver is a PCD8544 chip, and it runs at 3.3V so you’ll need a 3V supply handy (you don’t need that much current though, maybe 10mA tops). Logic levels must be 3V to prevent damage but we include a free level shifter chip so you can easily connect it to 5V logic such as an Arduino.Of course, we wouldn’t just point you to a datasheet and say «good luck!» To make it easy for you to use the display, we’ve written a nice graphics library that can print text, pixels, rectangles, circles and lines! The library is written for the Arduino but can easily be ported to your favorite microcontroller.We also have a detailed wiring and usage tutorial with more information about the display and more photos.Board size is 1.94″x1.66″x0.25″