This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a box.The jack half has two mounting ‘ears’ with M3 screws installed, 1 inch / 25.4mm apart. Can be used with box walls 0.125″ to 0.25″ wide. If you have a thinner-walled box, simply swap out the M3 screws for shorter ones. Entire cable is 11.5″ long.
- Panel mount USB type B socket with USB type B plug at cable end
- 28 AWG data, 24 AWG power wires
- 11.5″ long / 29 cm
- Two M3 mounting screws, 1″ / 25.4mm apart