Pimoroni Inky pHAT - eInk Display - Black/White
Pimoroni Inky pHAT - eInk Display - Black/WhitePimoroni Inky pHAT - eInk Display - Black/WhitePimoroni Inky pHAT - eInk Display - Black/WhitePimoroni Inky pHAT - eInk Display - Black/White

Pimoroni Inky pHAT — eInk Display — Black/White

1,245 грн.

Код товара: 3934
Категории: ,

Описание товара

Here at Adafruit we never tire of cool, new displays, so these super sweet e-paper displays really caught our eye! Pimoroni’s Inky pHat is a petite 212×104 pixel two-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don’t change often, due to the 3-second display-change-cycle. But the contrast and readability cannot be beat. Best of all, if you shut down the Pi, the display stays on, which is pretty magical the first time you see it.

No soldering required! The display is already assembled and connected via a ribbon cable. Just plop Inky pHAT on your Pi of choice and run the installer, and soon you’ll have the cutest little electronic paper display.

This particular e-Paper display is Black and White only - if you want a splash of color, check out the red tri-color or yellow tri-color versions. You’ll get an extra color layer but it takes longer to switch the display contents with those two.

Features:

  • 2.13″ EPD display (212×104 pixels)
  • Inky pHAT pinout
  • Compatible with Raspberry Pi 3 B+, 3, 2, B+, A+, Zero, and Zero W
  • Python library
  • Comes fully assembled

Quick note: Pimoroni’s software does not support Raspbian Wheezy.

  • Overall dimensions: 65x30x8.5mm (includes header and display)
  • Display usable area dimensions: 48.5×23.8mm (WxH), 2.13″ diagonal

For product support, replacement parts and warranty for Pimoroni products visit the Pimoroni forum or contact Pimoroni directly.