Описание товара
When we’re on the go, we like to keep a multimeter in our purse and this model is by far the best pocket meter we’ve found. It’s so good you’ll end up using it as your main multimeter!
First up, this meter can measure nearly everything: it’s got DC and AC voltage, resistance, diode, and beeping continuity test, capacitance, frequency, and current (both AC and DC in micro-Ampere and milli-Amp ranges.) There’s also an alkaline battery test — essentially a fixed range voltage test with a bigger drain to get a realistic load reading not just a floating voltage reading.
And that’s not all! It’s also auto-ranging, has a data-hold button and turns itself off automatically after about 15 minutes to preserve the battery life. There’s a removable fuse inside for the current sensing side — cheaper meters have the fuse soldered in.
Our favorite part is the nice hard-shell case which will protect the meter and will remind you to turn it off (it won’t close properly if the switch isn’t in the off position) and a smart cord-wrapping area to keep the leads from unwrapping and poking holes in stuff. Runs on two 1.5V alkaline coin cells, of the very common LR44 variety — some cheaper meters use rare 12V cells that are hard to find. Comes with one set of batteries pre-installed. This is a really nice pocket multimeter!
Dimensions: 116mm x 81mm x 13mm
Cables are each 55cm (22in)
Weight: 100 grams
CE category Cat II 300V
Measures 3 times per second
Operating Temperatures: 0°lC-40°C
Max display: 3999
Auto-range
Diode Test
Continuity with Beep
Data Hold
Symbol Display
Auto Off
Low Battery Indicator
DC Voltage:
Range: 400mV/4V/40V/400V
Resolution: 0.1mV Max
Accuracy: ±(0.8% + 3) @ 400mV Range, ±(1.5% + 4) @ 4V-400V Range
Input impedance: 10MΩ
AC Voltage:
Range: 4V/40V/400V
Resolution: 1mV Max
Accuracy: ±(0.8% + 4) @ 4V Range, ±(2.0% + 4) @ 50-60Hz 40V-400V Range, (2.8% + 4) 40-400Hz
Input impedance: 10MΩ
DC/AC Current:
uA Range: 400uA/4000uA
mA Range: 40mA/200mA
Resolution: 0.1uA
Accuracy: DC ±(2.0% + 4), AC ±(3.0% + 5) 40-400Hz
Overload protection: 250mA
Resistance Test:
Range: 400Ω/4KΩ/40KΩ/400KΩ/4MΩ
Resolution: 0.1 Ω
Accuracy: ±(2% + 4) on 400Ω-4MΩ range
Overload protection: 300VAC
Capacitance Test:
Range:50n/500n/5u/100uF
Resolution: 0.01 nF
Accuracy: ±(3% + 5) on 4n-100uF range
Frequency:
Range: 50/500/5K/50K/500K/5MHz
Resolution: 0.01 Hz
Accuracy: ±(1% + 4) on 10-1MHz range
Input: 300V rms Max @ 50-60Hz, 10V rms Max @ 40-1MHz
Diode:
Test current: 0.6mA
Open circuit voltage: ~1.5V
Resolution: 1 mV
Continuity:
If under 50 ± 20Ω
Battery Test:
1.5V @ 40mA