Набор Starter Pack без платы Raspberry Pi Model B2 или B+
Набор Starter Pack без платы Raspberry Pi Model B2 или B+Набор Starter Pack без платы Raspberry Pi Model B2 или B+Набор Starter Pack без платы Raspberry Pi Model B2 или B+

Набор Starter Pack без платы Raspberry Pi Model B2 или B+

Ожидается

Нет в наличии

Код товара: 2126
Категории: ,

Описание товара

You’re going to work hard with your Raspberry Pi B+.  You’re going to have to solder, code, and Linux your Maker heart out.  That’s why we’ve tried to make it as easy as possible to start — by combining the Raspberry Pi B+ with what we think are the best beginners’ Pi B+ accessories into one easy to use kit.

We’ve hand chosen these accessories as the perfect accompaniment to your new Raspberry Pi Model B+.  It’s everything you need to get going with a high quality power supply, Raspbian SD card, case, WiFi adapter, console cable, and lots of prototyping essentials.  It’s a great jumping off point for the rest of our extensive accessory and pack collection.

This pack DOES NOT include a Raspberry Pi Model B+ Computer!

This pack contains:

  • Adafruit Pi Box Plus — A great way to keep your Pi B+ snug and secure while also showing off this well-designed board.  The protective film on the case is brown paper-like, make sure to peel it off before you assemble the case! Compatible with GPIO cable and cobbler.
  • Adafruit Assembled Pi Cobbler Plus — This is the soldered together version of our popular Pi Cobbler Plus Kit.  Comes with a breakout board that’s perfect for cobbling prototypes as well as a 40-pin GPIO cable for your Pi’s pins.
  • ​Full Size Breadboard — In the past, we’ve used the half-size breadboard for a lot of Pi projects — but no longer! WIth 40 pins to break out, you’re going to need some space — and that’s why we’re including a full size breadboard in this pack.
  • Premium Male/Male Jumper Wires — 20 x 6″ (150mm) — These jumper wires are great for making wire harness or jumpering between headers on PCBs.  We include the longer ones so they work well with the full-size breadboard.
  • USB to TTL Serial Cable — An old standby, this cable’s pretty much the easiest way to connect your Raspberry Pi to a USB port to log into the debugging/login console. Ideal for running the Pi ‘headless’
  • USB WiFi Module — Give your Rasp Pi the Internet with this USB port WiFi module, this module is compact but has great range and is plenty fast.
  • 4GB SD card for Raspberry Pi preinstalled with Raspbian Wheezy — 4GB microSDHC card programmed with the latest Raspberry Pi Linux distribution.
  • 5V 2A Switching Power Supply w/ 20AWG 6′ MicroUSB Cable — This all-in-one 5V 2A power adapter is the perfect choice for powering your Raspberry Pi B+ with 2 Amps of current output, and an extra long cord.
  • Embroidered Raspberry Pi Badge — Now that you’re getting started, show off your Pi Pride with this beautifully embroidered, jewel toned, iron-on badge.
  • BONUS PARTS! Everyone loves bonuses so we include some parts that will get you through some of the tutorials on the Adafruit Learning System.  These include:
    • 1x Photo Cell
    • 5x 10K 5% 1/4W Resistor
    • 5x 560 ohm 5% 1/4W Resistor
    • 1x Diffused 10mm Blue LED
    • 1x Electrolytic Capacitor — 1.0uF
    • 1x Diffused 10mm Red LED
    • 1x Diffused 10mm Green LED
    • 3x 12mm Tactile Switches

We’re always adding new tutorials to our Learn System but here are a few that are worth checking out to start.  While they’re for the Model B, they will all apply to the Raspberry Pi Model B+.

  • Introduction to outputs — light up an LED when you get an e-mail
  • Introduction to inputs — play MP3 audio files when three different buttons are pressed
  • Introduction to sensors — reading a photo cell sensor with RC timing to detect light changes