Keep in mind that these displays are designed to be driven by FPGAs or other high speed processors: they do not have built in PWM control of any kind. Instead, you’re supposed to redraw the screen over and over to ‘manually’ PWM the whole thing. On a 16 MHz arduino, we managed to squeeze 12-bit color (4096 colors) with 40% CPU usage but this display would really shine if driven by any FPGA, CPLD, Propeller, XMOS or other high speed multi-core controller. The good news is that the display is pre-white balanced with nice uniformity so if you turn on all the LEDs its not a particularly tinted white.
Of course, we wouldn’t leave you with a datasheet and a «good luck!» We have a full wiring diagrams and working Arduino library code with examples from drawing pixels, lines, rectangles, circles and text. You’ll get your color blasting within the hour! On an Arduino, you’ll need 13 digital pins, and about 1600 bytes of RAM to buffer the 12-bit color image. At this time we do not have wiring documentation for the MEGA.
Please note! These panels are remainder stock from factories that make huge light boards. For that reason, the look and size might vary from batch to batch, even though the basic operation, codebase and tutorial is the same.
We don’t have a spec or datasheet at this time. However, these are the specifications from the factory
- Dimensions: 128mm x 128mm x 17mm (5.0″ x 5.0″ x 0.65″)
- Panel weight with IDC cables and power cable: 170 g
- 5V regulated power input, 2A max (all LEDs on)
- 3-5V data logic level input
- 2000 mcd LEDs on 4mm pitch
- 1/16 scan rate
- Indoor display, 150 degree visibility
- Displays are ‘chainable’ — connect one output to the next input — but our Arduino example code does not support this yet