Просмотр корзины → Товар успешно добавлен в корзину.
Teensy 3.2 + header
Teensy 3.2 + headerTeensy 3.2 + headerTeensy 3.2 + headerTeensy 3.2 + headerTeensy 3.2 + header

Teensy 3.2 + header

1,596 грн.

Код товара: 2756
Категории: ,
Теги: ,

Описание товара

  • Teensy 3.2 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.2 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino) or programming directly in C language. Teensy 3.2 is an upgrade over 3.1! Teensy 3.2 is a drop-in replacement upgrade for 3.1 and can run any sketches designed for 3.1.

    This latest version of this complete USB-based microcontoller development system now adds a more powerful 3.3V regulator, as well as accepts a wider voltage input range. This board has the same size, shape and pinout as well as full compatibility with all shields and add-on boards made for the Teensy 3.1, plus double the Flash memory as the Teensy 3.0.

    Let’s get started!

    Please note: Teensy 3 and 2 are not official Arduino-brand products. Although the Teensyduino IDE has been adapted so that many simple Arduino projects will work with the Teensy, there will still be a lot of libraries and shields that will not work with this device! If you’re new to microcontrollers, we suggest going with a classic Arduino UNO since all Arduino projects, examples and libraries will work with it.

    Once headers are installed they can be fitted into 0.6″ wide sockets

    Technical Specifications:

    • 32 bit ARM Cortex-M4 72MHz CPU (M4 = DSP extensions) Here is Freescale’s reference manual for the chip (warning 1227 pages) as well as the Datasheet and User Guide!
    • 256K Flash Memory, 64K RAM, 2K EEPROM
    • 21* High Resolution Analog Inputs (13 bits usable, 16 bit hardware)
    • 34* Digital I/O Pins (21 shared with analog)
    • 12 PWM outputs
    • 1 12-bit DAC output
    • 8 Timers for intervals/delays, separate from PWM
    • USB with dedicated DMA memory transfers
    • CAN bus
    • 3 UARTs (serial ports)
    • SPI, I2C, I2S, IR modulator
    • I2S (for high quality audio interface)
    • Real Time Clock (with user-added 32.768 crystal and battery)
    • 16 general purpose DMA channels (separate from USB)
    • Touch Sensor Inputs
  • Технические данные

    • Dimensions: 18mm x 37mm x 4mm / 1.4″ x 0.7″
    • Teensy 3 schematic

Teensy 3.2 + header

Работа магазина приостановлена. Заказы не принимаются.